Motor Replacement On The 29 Whirlpool Kenmore Kitchenaid Estate And Roper Washer

Before you begin, gather the following tools and materials:

Before starting any repairs, always unplug the washer from the power outlet and turn off the water supply. Wear safety glasses and gloves to protect yourself from potential hazards.

1. Remove the Top Panel

Motor Replacement on the 29" Whirlpool, Kenmore, Kitchenaid, Estate and Roper Washer

5 out of 5

FREE

For most models, the top panel is secured by a few screws at the back. Remove these screws and carefully lift off the top panel.

2. Locate the Motor

The motor is typically located at the bottom of the washer, behind the front panel. You may need to remove the front panel as well for better access.

3. Disconnect the Electrical Connections

Identify the electrical wires connected to the motor. Use a wrench or pliers to carefully disconnect these wires, taking note of their positions for reassembly.

4. Remove the Old Motor

Depending on your model, the motor may be held in place by bolts or screws. Remove these fasteners and carefully pull out the old motor.

5. Clean the Mounting Surface

Use a damp cloth to clean the mounting surface where the new motor will be installed. Remove any dirt, debris, or corrosion.

6. Install the New Motor

Carefully insert the new motor into the mounting surface. Secure it in place with the bolts or screws you removed earlier.

7. Reconnect the Electrical Connections

Reconnect the electrical wires to the new motor, ensuring they are securely fastened. Double-check your connections for accuracy.

8. Reinstall the Front Panel (if removed)

If you removed the front panel earlier, carefully align it and secure it in place with the screws.

9. Reinstall the Top Panel

Replace the top panel and secure it with the screws you removed earlier.

10. Test the Washer

Plug the washer back into the power outlet and turn on the water supply. Run a short test cycle to ensure the new motor is functioning properly.

• If you're not comfortable performing the repair yourself, it's advisable to seek professional assistance.
• Before purchasing a new motor, confirm its compatibility with your specific washer model.
• Use genuine replacement parts to ensure optimal performance and safety.
• If you encounter any difficulties during the process, don't hesitate to refer to your washer's user manual or consult online resources.

Replacing a washer motor can be a cost-effective way to restore your appliance to its former glory. By following the detailed instructions provided in this guide, you can confidently tackle this repair and save yourself the expense of a costly replacement. Remember to prioritize safety and seek professional help if needed. With a little patience and care, you can give your washer a new lease on life and enjoy years of reliable use.

Motor Replacement on the 29" Whirlpool, Kenmore, Kitchenaid, Estate and Roper Washer

5 out of 5

FREE